Removing A Host From Discovery; Viewing The Discovery State - HP Brocade BladeSystem 4/12 User Manual

Removing a Host from Discovery

To remove a Host from discovery, complete the following steps.
1. Select Discover > Setup.
2. Select the Host you want to remove from discovery.
3. Click Delete.
4. Click OK on the confirmation message.
5. Click Close on the Discover Setup dialog box.

Viewing the discovery state

The Management application enables you to view device status through the Discover Setup dialog
box.
To view the discovery status of a device, complete the following steps.
1. Select Discover > Setup.
2. Right-click a fabric and select Expand All to show all devices in the fabric.
DCFM Professional User Manual
53-1001773-01
The Discover Setup dialog box displays.
The deleted host displays in the Previously Discovered Addresses table.
The Discover Setup dialog box displays.
The Name field displays the discovery status icons in front of the device name. The following
table illustrates and describes the icons that indicate the current status of the discovered
devices.
TABLE 3
Discovery Status Icons
Icon Description
Displays when the fabric or host is managed and the management status is okay.
Displays when the fabric is managed and the switch management status is not okay.
Displays when the fabric or host is not managed.
The Discovery Status field details the actual status message text, which varies depending on
the situation. The following are samples of actual status messages:
•
Discovered: Seed Switch: Not registered for SNMP Traps
•
Discovered: Seed Switch: Not Manageable: Not registered for SNMP Traps
•
Discovered: Current seed switch is not recommended. Change Seed Switch. : Seed Switch:
Not registered for SNMP Traps
•
New Discovery Pending
Viewing the discovery state
2
49