Feature-To-Firmware Requirements - HP Brocade BladeSystem 4/12 User Manual

Feature-to-firmware requirements

Use the following table to determine whether the Management application features are only
available with a specific version of the Fabric OS firmware, M-EOS firmware, or both, as well as if
there are specific licensing requirements.
Feature
Access Gateway (AG)
Call Home (Professional Plus and
Enterprise Edition Only)
Discovery
Encryption (Professional Plus and
Enterprise Edition Only)
Enhanced Group Management
(Professional Plus and Enterprise
Edition Only)
Fault Management
Fabric Binding (Professional Plus
and Enterprise Edition Only)
FCIP Management
FICON (Enterprise Edition Only)
Firmware Management
High Integrity Fabric
DCFM Professional User Manual
53-1001773-01
Fabric OS
AG connected to Fabric OS devices requires
firmware 6.1.1 or later.
Requires Fabric OS 5.2 or later for supportSave.
Requires Fabric Watch license for SNMP traps.
Requires Fabric OS 5.0 or later for the seed switch
in a pure Fabric OS fabric.
Requires Fabric OS 6.0 or later for the seed switch
in a mixed Fabric OS and M-EOS fabric.
Requires Fabric OS 6.1.1_enc.
Requires Enhanced Group Management license.
Requires Fabric OS 4.4 or later for SNMP traps
Requires Fabric OS 5.2 or later in a pure Fabric OS
fabric.
Requires Fabric OS 6.0 or later in a mixed
Fabric OS and M-EOS fabric.
Requires Fabric OS 5.1 or later to modify.
Requires Fabric OS 5.3 or later for FCIP tunnels.
Requires FCIP license.
Requires Fabric OS 6.0 or later to enable the
FICON Emulation tab on the FCIP Tunnel
Advanced Settings dialog box.
Requires Fabric OS 5.2 or later for cascaded
FICON.
Requires Fabric OS 6.0 or later for advanced
FICON.
Requires Fabric OS 6.1.1 or later to configure
multiple Prohibit Dynamic Connectivity Mask
(PDCM) matrices.
Requires FICON CUP license to allow CUP
management features.
Requires Fabric OS 5.0 or later.
Requires Fabric OS 6.1.1 or later on 8G devices.
Requires Enhanced Group Management license to
perform group actions.
Requires Fabric OS 5.2 or later in a pure Fabric OS
fabric.
Requires Fabric OS 6.0 or later in a mixed
Fabric OS and M-EOS fabric.

Feature-to-firmware requirements

M-EOS
AG connected to M-EOS devices requires firmware
9.9.2 or later.
Requires M-EOS and M-EOSn 9.6.X or later.
Requires M-EOS 9.9.2 or later for the seed switch
in a pure M-EOS fabric.
Requires M-EOS and M-EOSn 9.6.X or later for
discovery.
Not available.
Not available.
Requires M-EOS and M-EOSn 9.6.X or later.
Requires M-EOS and M-EOSn 9.6.X or later.
Not available.
Only supports cascaded FICON configuration for
mixed fabrics.
Firmware download is only available through the
Element Manager.
Requires M-EOS and M-EOSn 9.6.X or later.
1
29