HP Brocade BladeSystem 4/12 User Manual page 515

1. Select Configure > IP Troubleshooting > Ping.
2. Select a switch from the Available Switches table.
3. Select a port from the GigE Port list.
4. Select an IP address switch from the IP Interface list.
5. Enter the remote IP address in the Remote IP Address field.
6. Click OK.
DCFM Professional User Manual
53-1001773-01
The IP Ping dialog box displays.
Ping sends four Internet Control Message Protocol (ICMP) Ping packets to the destination
address and records the time until a response.
The IP Ping Result dialog box displays with two tables.
The top table (FCIP IP Ping Response Details) contains the following statistics:
TABLE 26 FCIP IP Ping Response Details
Field or Component
Status
Packets Sent
Packets Received
Packets Lost
Packet Lost percentage
Minimum Round Trip Time
Maximum Round Trip Time
Average Round Trip Time
The bottom table (IP Ping Details) provides details for each ping attempt.
TABLE 27 IP Ping Details
Field or Component
Reply From
Status
Number of bytes
Description
Always displays 'Completed'. If there is a failure, an error message
displays instead of the IP Ping Result dialog box.
Always displays '4. This is not configurable.
The number of received responses.
Equal to the number of packets sent minus the number of packets
received.
The number of packets lost expressed as a percentage of the packets
sent. This will be 0%, 25%, 50%, 75% or 100% for 0, 1, 2, 3, or all 4
packets lost.
The shortest time, in milliseconds, of any response. If no response, the
round trip times is 0.
The longest time, in milliseconds, of any response. If no response, the
round trip times is 0.
The average time, in milliseconds, of all responses. If no response, the
round trip times is 0.
Description
The IP address of the device that sent the reply. For a normal response,
this is the destination IP address. Some error responses (such as
"destination unreachable") may come from an intermediate router.
Displays either Success or an error message (such as request timed out
or destination unreachable) from the switch.
The number of bytes in the data portion of the response. Should be 64,
matching the 64 bytes of data sent in the transmitted packet.
16
IP troubleshooting
483