HP Brocade BladeSystem 4/12 User Manual page 70

2
Fabric discovery overview
2. Click Add Fabric to specify the IP addresses of the devices you want to discover.
3. Enter a name for the fabric in the Fabric Name field.
4. Enter an IP address for a device in the IP Address field.
38
FIGURE 17
Discover Setup dialog box
The Address Properties dialog box displays.
FIGURE 18
Address Properties dialog box (IP Address tab)
For seed switch requirements, refer to
NOTE
The Backbone Chassis cannot be used as a seed switch.
NOTE
Professional and Professional Plus editions cannot manage the Backbone Chassis.
Professional edition cannot manage pure M-EOS fabrics.
"Seed switch requirements" on page 53.
DCFM Professional User Manual
53-1001773-01