Editing A Destination; Removing A Destination; Enabling Syslog Forwarding - HP Brocade BladeSystem 4/12 User Manual

8
Syslog forwarding

Editing a destination

To edit a destination, complete the following steps.
1. Select Monitor > Syslog Configuration.
2. Click the Syslog Forwarding tab.
3. Select the destination you want to edit in the Destinations table and click Edit.
4. Click OK on the Syslog Registration and Forwarding dialog box.

Removing a destination

To remove a destination, complete the following steps.
1. Select Monitor > Syslog Configuration.
2. Click the Syslog Forwarding tab.
3. Select the destination you want to remove in the Destinations table and click Remove.
4. Click OK on the Syslog Registration and Forwarding dialog box.

Enabling Syslog forwarding

You can enable Syslog forwarding on all defined destinations.
To enable trap forwarding, complete the following steps.
1. Select Monitor > Syslog Configuration.
2. Click the Syslog Forwarding tab.
3. Select the Enable Syslog forwarding check box.
4. Click OK on the Syslog Registration and Forwarding dialog box.
212
The Syslog Registration and Forwarding dialog box displays.
The Add/Edit Syslog Recipient dialog box displays.
a. (Optional) In the Description field, edit the description of the Syslog recipient.
b. In the IP Address field, edit the Syslog recipient's IP address.
The Management application accepts IP addresses in IPv4 or IPv6 formats.
c. Edit the Syslog recipient's TCP/IP port number, in the port field.
d. Click OK on the Add/Edit Syslog Recipient dialog box.
The Syslog Registration and Forwarding dialog box displays.
Press Ctrl and then click to select more than one destination.
The Syslog Registration and Forwarding dialog box displays.
DCFM Professional User Manual
53-1001773-01