Configuring Snmp Credentials - HP Brocade BladeSystem 4/12 User Manual

16. Enter a context name In the Context Name field.
17. Select the authorization protocol in the Auth Protocol field.
18. Enter the authorization password in the Auth Password field.
19. Select the privacy protocol in the Priv Protocol field.
20. Enter the privacy password in the Priv Password field.
21. Click OK on the Address Properties dialog box.
22. Click OK on the Discover Setup dialog box.

Configuring SNMP credentials

1. Select Discover > Setup.
2. Select an IP address from the Available Addresses table.
3. Click Edit.
4. Click the SNMP tab.
5. Select the SNMP version from the SNMP Version list.
6. Specify the Read option by selecting Default 'public' or Custom.
7.
8. Specify the Write option by selecting Default 'private' or Custom.
9. If you selected Custom, enter the community string in the Custom and Confirm Custom fields.
10. If you are configuring a 256-Port director, select the Configure for 256-Port_Director_Name
DCFM Professional User Manual
53-1001773-01
•
If you selected Configure for 256-Port_Director_Name, go to step 21.
•
If you did not select Configure for 256-Port_Director_Name, continue with step 19.
If the seed switch is partitioned, the Undiscovered Seed Switches dialog box displays.
a. Select the Select check box for each undiscovered seed switch to discover their fabrics.
b. Click OK on the Undiscovered Seed Switches dialog box.
The Discover Setup dialog box displays.
The Address Properties dialog box displays.
•
If you selected v1, continue with step 6.
•
If you select v3, the SNMP tab displays the v3 required parameters. Go to step 10.
If you selected Custom, enter the community string in the Custom and Confirm Custom fields.
Go to step 21.
check box.
•
If you selected Configure for 256-Port_Director_Name, go to step 14.
•
If you did not select Configure for 256-Port_Director_Name, continue with step 11.
Fabric discovery overview
2
41