Viewing Active Sessions; Disconnecting Users - HP Brocade BladeSystem 4/12 User Manual

1
Management server and client

Viewing active sessions

To view the Management application active sessions, complete the following steps.
1. Select Server > Active Sessions.
2. Review the active session information.
3. Click Close.

Disconnecting users

To disconnect a user, complete the following steps.
1. Select Server > Active Sessions.
2. Select the user you want to disconnect and click Disconnect.
3. Click Yes on the confirmation message.
4. The user you disconnected receives a 'you have been disconnected' message.
5. Click Close.
22
If the current password and new password are the same, the following message displays:
Old and New passwords cannot be same. Use different password and try again.
Press any key to continue.
If the new password and confirm password do not match, the following message displays:
New password and confirm password do not match. Please try again.
Press any key to continue.
The Active Sessions dialog box displays
FIGURE 14
Active Sessions dialog box
The following information displays:
•
ID—Displays the name of the user (for example, Administrator).
•
Description—Displays the description of the user (for example, Operator).
•
Network Address—Displays the network address of the user.
•
Client Type—Displays the type of Management application client.
•
Connected—Displays the date and time the user connected to the server.
The Active Sessions dialog box displays.
(Figure 15).
DCFM Professional User Manual
53-1001773-01