HP Brocade BladeSystem 4/12 User Manual page 358

13
Access Control List configuration
FIGURE 120
5. Select an ACL from the Available ACLs list.
6. Click OK to commit the assign the ACL to the port or LAG.
7.
8. Click Start to apply the changes, or click Close to abort the operation.
326
Assign ACL to port dialog box
The ACL name is suffixed with its type (standard or extended) in parentheses; for example,
Human Resources (Extended). The details of the selected ACL are displayed in the Assigned
ACL Details table, shown in
The CEE Confirmation and Status dialog box displays.
Review the changes carefully before you accept them.
Figure 120.
DCFM Professional User Manual
53-1001773-01