Policy Triggers - HP Brocade BladeSystem 4/12 User Manual

8
Event policies
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•

Policy triggers

A trigger is a logical filter that determines which conditions will initiate a set of predefined actions.
You can set multiple triggers. The Management application enables you to set the following
triggers:
•
•
•
184
Authentication Event — occurs when an authentication event has been triggered.
Call Home Event — occurs when a call home event has been triggered.
Config Management Event — occurs when a configuration management event has been
triggered
Data Encryption Event — occurs when a data encryption event has been triggered.
Device Status Event — notifies you of the operational status of SAN products.
Fabric Event — notifies you of fabric changes.
Fault Management Event — occurs when an event policy has been triggered.
FICON Event — occurs when a FICON event has been triggered
Link Incident Event — notifies you of changes to the link status.
Management Server Event — occurs when a management server event has been triggered
Performance Event — occurs when the performance at a switch port crosses a defined
threshold.
Port Fencing Event — occurs when a port fencing event has been triggered
Product Audit Event — occurs when a target product is audited.
Product Event — notifies you when the product status changes.
Product Open Trunking Event — occurs when a device open trunking event has been triggered.
Product State Event — occurs when a device or connection changes to Up or Down.
Product Threshold Alert Event — notifies you when a threshold alert has been reached.
Security Event — notifies you when a product's security level changes.
Software Exception Event — occurs when a software exception event has been triggered.
Tech Support Event — occurs when a technical support event is triggered.
User Action Event — occurs when you change a setting in the Server.
Zoning Event — occurs when a zoning event has been triggered.
IP Address — Initiates the defined action when the IP address of a device is encountered.
Node WWN — Initiates the defined action when the Node WWN of a device is encountered.
Name — Initiates the defined action when the Name (user-defined) of a device is encountered.
DCFM Professional User Manual
53-1001773-01