Encryption Center Features - HP Brocade BladeSystem 4/12 User Manual

14

Encryption Center features

Encryption Center features

The Encryption Center dialog box
encryption-related configuration in the Management application. It also provides a table that shows
the general status of all encryption-related hardware and functions at a glance.
FIGURE 127
Beginning with Fabric OS version 6.4, the Encryption Center is dynamically updated to reflect the
latest changes based on any of the following events:
•
•
•
•
•
If you are using the Encryption Center for the first time, please read the following topics before you
begin to perform encryption operations:
•
•
•
•
•
•
340
Encryption Center dialog box
Encryption group creation or deletion.
A change in encryption group status.
Addition or removal of an encryption group member.
Addition or removal of an encryption engine.
A change in encryption engine status.
"Encryption user privileges"
that are specific to encryption.
"Smart card usage" on page 342 and the topics that follow describe the options available for
the use of Smart Cards for user authentication, system access control, and storing backup
copies of data encryption master keys.
"Network connections" on page 349 describes the network connections that must be in place
to enable encryption.
"Configuring blade processor links"
encryption switches or blades in an encryption group through a dedicated LAN. This must be
done before their encryption engines are enabled. Security parameters and certificates cannot
be exchanged if these links are not configured and active.
"Encryption node initialization and certificate generation"
parameters and certificates that are generated when an encryption node is initialized.
"Supported encryption key manager appliances"
appliances, and lists topics that provide additional detail.
(Figure 127) is the single launching point for all
on page 341 describes the Role-based Access Control privileges
on page 349 describes the steps for interconnecting
on page 351 lists the supported key manager
on page 350 lists the security
DCFM Professional User Manual
53-1001773-01