Editing Fcip Circuits - HP Brocade BladeSystem 4/12 User Manual

Editing FCIP circuits

FCIP circuit settings may be edited from the Edit FCIP Circuit dialog box. The procedure for
launching this dialog box for the 4 Gbps Router, Extension Switch and Blade is different than the
procedure for the 8 Gbps 16-FC ports, 6-Gbit ports Extension Switch and the 8 Gbps 12-FC port, 10
GbE ports, 2-10 GbE ports Extension blade. The 4 Gbps Router, Extension Switch and Blade have
only one circuit per tunnel, and the circuit is edited as part of the tunnel. The 8 Gbps 16-FC ports,
6-Gbit ports Extension Switch and 8 Gbps 12-FC port, 10 GbE ports, 2-10 GbE ports Extension
blade may have multiple circuits per tunnel, and circuits may be selected individually.
For the 4 Gbps Router, Extension Switch and Blade:
1. From the FCIP Tunnels dialog box, select the tunnel you want to edit.
2. Select Edit Tunnel.
3. Select Edit FCIP Circuit.
For the 8 Gbps 16-FC ports, 6-Gbit ports Extension Switch and the 8 Gbps 12-FC port, 10 GbE
ports, 2-10 GbE ports Extension blade:
1. From the FCIP Tunnels dialog box, select the tunnel you want to edit.
2. Select the Circuit tab.
3. Select a circuit from the circuit properties table.
4. Select Edit Circuit.
DCFM Professional User Manual
53-1001773-01
The Edit FCIP Tunnel dialog box displays.
The Edit FCIP Circuit dialog box displays.
The Edit FCIP Circuit dialog box displays

Editing FCIP circuits

(Figure 99).
12
273