HP Brocade BladeSystem 4/12 User Manual page 127

Configuring asset polling
Asset polling allows you set the length of time between state change polling. To maximize the
efficiency of the polling feature (balance the amount of possible information with any possible
performance impact), base your settings on the size of the SAN.
To configure asset polling, complete the following steps.
1. Select Server > Options.
2. Select Memory Allocation in the Category list to set the memory allocation for the server and
3. Enter how often (default is 60 seconds) you want to check for state changes in the Check for
4. Enter how often (default is 120 seconds) you want to check for state changes in the If no state
5. Click Apply or OK to save your work.
6. Click OK on the "changes take effect after application restart" message.
DCFM Professional User Manual
53-1001773-01
The Options dialog box displays.
client.
state change every field.
You cannot enter a value lower than the default minimum value.
change, Poll switch every field.
NOTE
Changes to this option take effect after an application restart.
Software Configuration
3
95