Configuring Snmp Support; Entering A Community String - HP BladeSystem bc2000 - Blade PC User Manual

Configuring SNMP Support

NOTE: Only enclosure administrators may execute these tasks.

Entering a Community String

To enter a read community or write community string using the Web-based user interface:
1. Click the Enclosure tab.
2. Click SNMP Configuration in the left panel.
3. Click the Read Community or Write Community field.
4. Type the string.
NOTE:
"public." Entering a blank string into the Write Community field disables the SNMP set commands.
5. 5. Click Apply.
To enter a read community or write community string using the CLI, type:
SET SNMP COMMUNITY [READ | WRITE] <community name>
The write <community name> must be 1-20 characters long and the read <community name> must be
1-20 characters long. Both community names support all alphanumeric characters, the underscore, and
the dash characters.
86 Chapter 6 Setting Up the System
Entering a blank string into the Read Community field sets the Read Community to
ENWW