Fcoe Licensing; Save Running To Startup; Copying Switch Configurations To Selected Switches - HP Brocade BladeSystem 4/12 User Manual

13

FCoE Licensing

FCoE Licensing
The FCoE license enables Fibre Channel over Ethernet (FCoE) functionality on the Brocade 8000.
Without the FCoE license, the Brocade 8000 is a pure L2 Ethernet switch and will not allow FCoE
bridging capabilities.
With the FCoE license, the FCoE Configuration dialog displays virtual FCoE port information and
enables you to manage the virtual port information. The topology displays directly-connected
converged network adapters (CNAs) and the Properties dialog for the virtual FCoE port details.
Without the FCoE license, the virtual FCoE port displays in the device tree, but you cannot enable,
disable, or view virtual FCoE port information.

Save running to startup

The Save running to startup dialog box lists discovered CEE switches with Fabric OS version 6.3x
firmware or higher. You can select available switches and move them to the Selected Switches
table. Upon startup, the CEE switch configuration is copied to the selected switches.
NOTE
This dialog box launches if there is at least one CEE switch discovered. If no CEE switches exist, a
warning dialog displays.

Copying switch configurations to selected switches

1. To access the Save running to startup dialog box, select Configure > Switch > Save Running to
FIGURE 104
286
Startup from the menu bar.
The Save Running to Startup dialog box displays.
Save running to startup dialog box
DCFM Professional User Manual
53-1001773-01