Voice Vlan Mode Auto - HP 6125G Command Reference Manual

oui: Specifies the OUI address you want to remove, in the format of H-H-H. For example,
1234- 1 200-0000. An OUI address is the logic AND result of mac-address and oui-mask. An OUI
address cannot be a broadcast address, a multicast address, or an all-zero address.
Description
Use voice vlan mac-address to allow packets carrying the specified OUI address to pass through.
Use undo voice vlan mac-address to prohibit packets carrying the specified OUI address from passing
through.
Use display voice vlan oui to display the OUI addresses supported.
By default, the system is configured with the default OUI addresses. You can remove the default OUI
addresses and then add recognizable OUI addresses manually.
The Switch Series supports up to 16 OUI addresses.
Table 43 Default OUI addresses
Number
1
2
3
4
5
6
7
Related commands: display voice vlan oui.
Examples
# Add a recognizable OUI address 1234- 1 200-0000 by specifying the MAC address as
1234- 1 234- 1 234 and the mask as fff-ff00-0000, and configure its description string as PhoneA.
<Sysname> system-view
[Sysname] voice vlan mac-address 1234-1234-1234 mask ffff-ff00-0000 description PhoneA

voice vlan mode auto

Syntax
voice vlan mode auto
undo voice vlan mode auto
View
Layer 2 Ethernet interface view
Default level
2: System level
Parameters
None
OUI address
0001-E300-0000
0003-6B00-0000
0004-0D00-0000
00D0-1E00-0000
0060-B900-0000
00E0-7500-0000
00E0-BB00-0000
178
Vendor
Siemens phone
Cisco phone
Avaya phone
Pingtel phone
Philips/NEC phone
Polycom phone
3Com phone