Voice Vlan Qos Trust; Voice Vlan Security Enable - HP 6125G Command Reference Manual

<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] voice vlan qos 5 45

voice vlan qos trust

Syntax
voice vlan qos trust
undo voice vlan qos
View
Layer 2 Ethernet interface view
Default level
2: System level
Parameters
None
Description
Use voice vlan qos trust to configure the interface to trust the priority settings carried in incoming voice
traffic. With this command configured, an interface keeps the CoS and DSCP values marked for
incoming voice traffic unchanged.
Use undo voice vlan qos to restore the default.
By default, an interface modifies the CoS value and the DSCP value marked for voice VLAN traffic into
6 and 46, respectively.
Configure the QoS priority trust mode for voice VLAN traffic on an interface before enabling voice VLAN
on the interface. If the configuration order is reversed, your priority trust setting will fail.
The voice vlan qos command and the voice vlan qos trust command can overwrite each other. After you
execute the two commands on a port multiple times, the one that was last executed takes effect.
Related commands: voice vlan qos.
Examples
# Configure interface GigabitEthernet 1/0/1 to trust the priority settings carried in incoming voice VLAN
traffic.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] voice vlan qos trust

voice vlan security enable

Syntax
voice vlan security enable
undo voice vlan security enable
View
System view
180