Stp Port Priority - HP 6125G Command Reference Manual

Parameters
auto: Specifies automatic detection of the link type.
force-false: Specifies the non-point-to-point link type.
force-true: Specifies the point-to-point link type.
Description
Use stp point-to-point to configure the link type of the ports.
Use undo stp point-to-point to restore the default.
The default setting is auto and the spanning tree device automatically detects whether a port connects to
a point-to-point link.
Configured in Ethernet interface view, the setting takes effect only on the interface.
Configured in Layer 2 aggregate interface view, the setting takes effect only on the aggregate interface.
Configured on a member port in an aggregation group, the setting takes effect only after the port leaves
the aggregation group.
When connecting to a non-point-to-point link, a port is incapable of rapid state transition.
You can configure the link type as point-to-point for a Layer 2 aggregate interface or a port that operates
in full duplex mode. HP recommends that you use the default setting, which lets the device automatically
detect the port link type.
The stp point-to-point force-false or stp point-to-point force-true command configured on a port in MSTP
mode is effective for all MSTIs.
If the physical link to which the port connects is not a point-to-point link but you set it to be one, the
configuration may bring a temporary loop.
Related commands: display stp.
Examples
# Configure the link connecting GigabitEthernet 1/0/3 as a point-to-point link.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/3
[Sysname-GigabitEthernet1/0/3] stp point-to-point force-true

stp port priority

Syntax
stp [ instance instance-id ] port priority priority
undo stp [ instance instance-id ] port priority
View
Ethernet interface view, Layer 2 aggregate interface view
Default level
2: System level
Parameters
instance instance-id: Sets the priority of the ports in a particular MSTI. The value of instance-id ranges
from 0 to 32, where 0 represents the CIST.
116