Lldp Compliance Cdp; Lldp Enable - HP 6125G Command Reference Manual

<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] lldp compliance admin-status cdp txrx

lldp compliance cdp

Syntax
lldp compliance cdp
undo lldp compliance cdp
View
System view
Default level
2: System level
Parameters
None
Description
Use lldp compliance cdp to enable global CDP compatibility.
Use undo lldp compliance cdp to restore the default.
By default, CDP compatibility is globally disabled.
Because the maximum TTL allowed by CDP is 255 seconds, the TTL configuration must be no more than
255 seconds for CDP-compatible LLDP to operate with Cisco IP phones. The TTL configuration is the
product of the TTL multiplier and the LLDPDU transmit interval.
Related commands: lldp hold-multiplier and lldp timer tx-interval.
Examples
# Enable LLDP to be compatible with CDP globally.
<Sysname> system-view
[Sysname] lldp compliance cdp

lldp enable

Syntax
lldp enable
undo lldp enable
View
System view, Layer 2 Ethernet interface view
Default level
2: System level
Parameters
None
217