Link-Aggregation Selected-Port Minimum; Port Link-Aggregation Group - HP 6125G Command Reference Manual

Description
Use link-aggregation port-priority to set the aggregation priority of a port.
Use undo link-aggregation port-priority to restore the default setting.
The default aggregation priority of a port is 32768.
Examples
# Set the aggregation priority of port GigabitEthernet 1/0/1 to 64.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] link-aggregation port-priority 64

link-aggregation selected-port minimum

Syntax
link-aggregation selected-port minimum number
undo link-aggregation selected-port minimum
View
Layer 2 aggregate interface view
Default level
2: System level
Parameters
number: Specifies the minimum number of Selected ports in an aggregation group required to bring up
the aggregate interface. This argument ranges from 1 to 8.
Description
Use link-aggregation selected-port minimum to configure the minimum number of Selected ports in the
aggregation group.
Use undo link-aggregation selected-port minimum to restore the default setting.
By default, the minimum number of Selected ports in an aggregation group is not specified.
Executing this command may cause all the member ports in the aggregation group to become
unselected.
The minimum numbers of Selected ports for the local and peer aggregation groups must be consistent.
Examples
# Configure the minimum number of Selected ports as 3 in the aggregation group corresponding to
Layer 2 aggregate interface Bridge-Aggregation 1.
<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] link-aggregation selected-port minimum 3

port link-aggregation group

Syntax
port link-aggregation group number
80