Display Link-Aggregation Load-Sharing Mode - HP 6125G Command Reference Manual

Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display lacp system-id to display the system ID of the local system.
The system ID comprises the system LACP priority and the system MAC address.
Use lacp system-priority to change the LACP priority of the local system. Although you specify the LACP
priority value in decimal format in the lacp system-priority command, it is displayed as a hexadecimal
value with the display lacp system-id command.
Related commands: lacp system-priority.
Examples
# Display the local system ID.
<Sysname> display lacp system-id
Actor System ID: 0x8000, 0000-fc00-6504
Table 16 Command output
Field
Actor System ID: 0x8000,
0000-fc00-6504

display link-aggregation load-sharing mode

Syntax
display link-aggregation load-sharing mode [ interface [ bridge-aggregation interface-number ] ] [ |
{ begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
bridge-aggregation: Displays the load sharing criteria of the aggregation group corresponding to the
specified Layer 2 aggregate interface.
interface-number: Specifies an existing aggregate interface number.
Description
The local system ID, which comprises the system LACP priority (0x8000
in this sample output) and the system MAC address (0000-fc00-6504 in
this sample output).
67