Ip-Subnet-Vlan - HP 6125G Command Reference Manual

Table 39 Command output
Field
Subnet Index
IP Address
Subnet Mask

ip-subnet-vlan

Syntax
ip-subnet-vlan [ ip-subnet-index ] ip ip-address [ mask ]
undo ip-subnet-vlan { ip-subnet-index [ to ip-subnet-end ] | all }
View
VLAN view
Default level
2: System level
Parameters
ip-subnet-index: Specifies a beginning IP subnet index, in the range of 0 to 1 1. The value can be
configured by users, or automatically numbered by the system, based on the order in which the IP subnets
or IP addresses are associated with the VLAN.
ip ip-address [ mask ]: Specifies the source IP address or network address based on which the
subnet-based VLANs are classified, in dotted decimal notation. The mask argument is the subnet mask of
the source IP address or network address, in dotted decimal notation with a default value of
255.255.255.0.
to: Specifies an IP subnet index range.
ip-subnet-end: Specifies an end IP subnet index, in the range of 0 to 1 1. The value must be greater than
or equal to the beginning IP subnet index.
all: Removes all the associations between VLANs and IP subnets or IP addresses.
Description
Use ip-subnet-vlan to associate the VLAN with a specified IP subnet or IP address.
Use undo ip-subnet-vlan to remove the association.
The IP subnet or IP address cannot be a multicast network segment or a multicast address.
Related commands: display ip-subnet-vlan vlan.
Examples
# Configure VLAN 3 as an IP subnet-based VLAN and associate it with the 192.168.1.0/24 network
segment.
<Sysname> system-view
[Sysname] vlan 3
[Sysname-vlan3] ip-subnet-vlan ip 192.168.1.0 255.255.255.0
Description
IP subnet index.
IP address of the subnet. It can be an IP address or a network address.
Mask of the IP subnet.
163