Display Gvrp Vlan-Operation; Garp Timer Hold - HP 6125G Command Reference Manual

display gvrp vlan-operation

Syntax
display gvrp vlan-operation interface interface-type interface-number [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
0: Visit level
Parameters
interface interface-type interface-number: Specifies an interface by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display gvrp vlan-operation to display information about dynamic VLAN operations on a port.
Examples
# Display information about dynamic VLAN operations on GigabitEthernet 1/0/1.
<Sysname> display gvrp vlan-operation interface gigabitethernet 1/0/1
Dynamic VLAN operations on port GigabitEthernet1/0/1

garp timer hold

Syntax
garp timer hold timer-value
undo garp timer hold
View
Ethernet interface view, Layer-2 aggregate interface view
Default level
2: System level
Operations of creating VLAN
Operations of deleting VLAN
Operations of adding VLAN to TRUNK
Operations of deleting VLAN from TRUNK
188
: 2-100
: none
: 2-100
: none