undo port link-aggregation group
View
Ethernet interface view
Default level
2: System level
Parameters
number: Specifies the number of the aggregate interface corresponding to an aggregation group. The
number argument ranges from 1 to 128.
Description
Use port link-aggregation group to assign the Ethernet interface to the specified aggregation group.
Use undo port link-aggregation group to remove the Ethernet interface from the aggregation group to
which it belongs.
An Ethernet interface can belong to only one aggregation group.
Examples
# Assign Layer 2 Ethernet interface GigabitEthernet 1/0/1 to Layer 2 aggregation group 1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] port link-aggregation group 1
reset counters interface
Syntax
reset counters interface [ bridge-aggregation [ interface-number ] ]
View
User view
Default level
2: System level
Parameters
bridge-aggregation: Clears statistics for Layer 2 aggregate interfaces.
interface-number: Specifies an aggregate interface number. If the interface-number argument is not
specified, this command clears statistics of all aggregate interfaces of the specified type.
Description
Use reset counters interface to clear the statistics of the specified aggregate interface or interfaces.
Before collecting statistics for a Layer 2 aggregate interface within a specific period, clear the existing
statistics of the interface.
If no keywords or argument is specified, the command clears the statistics of all interfaces in the
•
system.
If only the bridge-aggregation keyword is specified, the command clears the statistics of all Layer
•
2 aggregate interfaces.
If the bridge-aggregation interface-number keyword and argument combination is specified, the
•
command clears the statistics of the specified Layer 2 aggregate interface.
81