Layer 2 Forwarding Configuration Commands; Cut-Through Enable - HP 6125G Command Reference Manual

Layer 2 forwarding configuration commands

cut-through enable

Syntax
cut-through enable
undo cut-through enable
View
System view
Default level
2: System level
Parameters
None
Description
Use the cut-through enable command to enable cut-through forwarding.
Use the undo cut-through enable command to disable cut-through forwarding.
By default, cut-through forwarding is disabled.
Examples
# Enable cut-through forwarding.
<Sysname> system-view
[Sysname] cut-through enable
230