Storm-Constrain Interval; Unicast-Suppression - HP 6125G Command Reference Manual

Examples
# Disable GigabitEthernet 1/0/1 from sending out storm control threshold event traps.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] undo storm-constrain enable trap

storm-constrain interval

Syntax
storm-constrain interval seconds
undo storm-constrain interval
View
System view
Default level
2: System level
Parameters
seconds: Sets the traffic polling interval of the storm control module, ranging from 1 to 300 seconds.
Description
Use storm-constrain interval to set the traffic polling interval of the storm control module.
Use undo storm-constrain interval to restore the default.
By default, the storm control module polls traffic statistics every 10 seconds.
For network stability, use the default or a higher polling interval.
NOTE:
The interval set by the storm-constrain interval command is specific to storm control. To set the statistics
polling interval of an interface, use the flow-interval command.
Examples
# Set the traffic statistics polling interval of the storm control module to 60 seconds.
<Sysname> system-view
[Sysname] storm-constrain interval 60

unicast-suppression

Syntax
unicast-suppression { ratio | pps max-pps | kbps max-kbps }
undo unicast-suppression
View
Ethernet interface view
Default level
2: System level
36