Display Gvrp Statistics - HP 6125G Command Reference Manual

Field
Registrar state machine

display gvrp statistics

Syntax
display gvrp statistics [ interface interface-list ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
interface interface-list: Displays the GVRP statistics of one or multiple Ethernet ports.
You can provide up to 10 Ethernet port lists, specified in the following ways:
As an individual port in the form of interface-type interface-number
•
As a port range in the form of interface-type interface-number1 to interface-type interface-number2,
•
where the end-port number specified by interface-number2 must be greater than the start-port
number specified by interface-number1
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display gvrp statistics to display the GVRP statistics of the specified trunk ports. If no ports are
specified, this command displays the GVRP statistics for all trunk ports.
Examples
# Display GVRP statistics for trunk port GigabitEthernet 1/0/1.
<Sysname> display gvrp statistics interface gigabitethernet 1/0/1
Description
Registrar state machine records the registration of attributes
declared by other participants. Its state can be INN, LV, L3,
L2, L1, MT, INR, LVR, L3R, L2R, L1R, MTR, INF, LVF, L3F,
L2F, L1F, and MTF. Each state consists of two or three letters
or numbers with the following meanings:
•
The first two letters or numbers indicate the state: IN
stands for In; LV, L3, L2, and L1 all stand for Leaving, and
L3, L2, L1 are three sub-states of LV; MT stands for Empty
•
The third letter indicates the registration mode: N (if any)
for Normal registration, R for Registration fixed, and F for
Registration forbidden.
For example, MTR stands for "Empty, Registration fixed",
indicating the fixed registration mode in Empty state.
186