HP 6125G Command Reference Manual page 101

Field
Port Edged
Point-to-point
Transmit Limit
Protection Type
MST BPDU Format
Port Config-
Digest-Snooping
Rapid transition
Num of Vlans Mapped
PortTimes
BPDU Sent
BPDU Received
MSTI RegRoot/IRPC
MSTI RootPortId
MSTI Root Type
Master Bridge
Cost to Master
TC received
Protocol Status
Protocol Std.
Version
Bridge-Prio.
Max age(s)
Description
The port is an edge port or non-edge port.
•
Config—Configured value.
•
Active—Actual value.
The port is connected to a point-to-point link or not.
•
Config—Configured value.
•
Active—Actual value.
Maximum number of packets sent within each hello time.
Protection type on the port:
•
Root—Root guard.
•
Loop—Loop guard.
•
BPDU—BPDU guard.
•
BPDU/ROOT—BPDU guard and root guard.
•
None—No protection.
Format of the MST BPDUs that the port can send, which can be legacy or 802.1s.
•
Config—Configured value.
•
Active—Actual value.
Status of Digest Snooping on the port.
The port rapidly transitions to the forwarding state or not in the MSTI.
Number of VLANs mapped to the MSTI.
Major parameters for the port:
•
Hello—Hello timer.
•
MaxAge—Max Age timer.
•
FWDly—Forward delay timer.
•
MsgAge—Message Age timer.
•
RemHop—Remaining hops.
Statistics on sent BPDUs.
Statistics on received BPDUs.
MSTI regional root/internal path cost.
MSTI root port ID.
MSTI root type, which can be primary root or secondary root.
MSTI root bridge ID.
Path cost from the MSTI to the master bridge.
Number of received TC BPDUs.
Spanning tree protocol status.
Spanning tree protocol standard.
Spanning tree protocol version.
In MSTP mode, this field indicates the device's priority in the CIST.
Aging timer (in seconds) for BPDUs.
93