Display Interface - HP 6125G Command Reference Manual

Layer 2 - lan switching
Hide thumbs Also See for 6125G:
Table of Contents

Advertisement

Field
Multicast (pkts/sec)
Overflow: more than 14
decimal digits.
--: not supported.

display interface

Syntax
display interface [ interface-type ] [ brief [ down ] ] [ | { begin | exclude | include } regular-expression ]
display interface interface-type interface-number [ brief ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
interface-type: Specifies an interface type.
interface-number: Specifies an interface number.
brief: Displays brief interface information. If you do not specify this keyword, the command displays
detailed interface information.
down: Displays information about interfaces in down state and the causes. If you do not specify this
keyword, this command displays information about interfaces in all states.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display interface to display Ethernet interface information.
If no interface type is specified, this command displays information about all interfaces.
If an interface type is specified but no interface number is specified, this command displays information
about all interfaces of that type.
Related commands: interface.
Examples
# Display detailed information about interface GigabitEthernet 1/0/1.
Description
Average rate (packets per second) of receiving or sending multicast packets
during the sampling interval.
The command displays Overflow, if any of the following applies:
The data length of an error statistic is greater than 7 decimal digits.
The data length of a non-error statistic is greater than 14 decimal digits.
The statistical item is not supported.
6

Advertisement

Table of Contents
loading

This manual is also suitable for:

6125 blade switch series

Table of Contents