Display Counters Rate - HP 6125G Command Reference Manual

Layer 2 - lan switching
Hide thumbs Also See for 6125G:
Table of Contents

Advertisement

|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display counters to display traffic statistics for interfaces.
If an interface type is specified, this command displays traffic statistics for all interfaces of the
specified type.
If no interface type is specified, this command displays traffic statistics for all interfaces that have
traffic counters.
Examples
# Display inbound traffic statistics for all GigabitEthernet interfaces.
<Sysname> display counters inbound interface gigabitethernet
Interface
GE1/0/1
GE1/0/2
GE1/0/3
GE1/0/4
Overflow: more than 14 decimal digits(7 digits for column "Err").
--: not supported.
Table 1 Command output
Field
Interface
Total (pkts)
Broadcast (pkts)
Multicast (pkts)
Err (pkts)
Overflow: more than 14
decimal digits(7 digits for
column "Err").
--: not supported.

display counters rate

Syntax
display counters rate { inbound | outbound } interface [ interface-type ] [ | { begin | exclude | include }
regular-expression ]
Total(pkts)
Broadcast(pkts)
100
0
Overflow
0
Description
Abbreviated interface name.
Total number of packets received or sent through the interface.
Total number of broadcast packets received or sent through the interface.
Total number of multicast packets received or sent through the interface.
Total number of error packets received or sent through the interface.
The command displays Overflow, if any of the following applies:
The data length of an error statistic is greater than 7 decimal digits.
The data length of a non-error statistic is greater than 14 decimal digits.
The statistical item is not supported.
4
Multicast(pkts) Err(pkts)
100
0
Overflow
0
0
0
0
0
Overflow
Overflow
0
0

Advertisement

Table of Contents
loading

This manual is also suitable for:

6125 blade switch series

Table of Contents