Mac-Vlan Mac-Address; Mac-Vlan Trigger Enable - HP 6125G Command Reference Manual

Layer 2 - lan switching
Hide thumbs Also See for 6125G:
Table of Contents

Advertisement

mac-vlan mac-address

Syntax
mac-vlan mac-address mac-address [ mask mac-mask ] vlan vlan-id [ priority pri ]
undo mac-vlan { all | mac-address mac-address [ mask mac-mask ] | vlan vlan-id }
View
System view
Default level
2: System level
Parameters
mac-address mac-address: Specifies a MAC address.
mask mac-mask: Specifies a mask for the MAC address in the format of H-H-H. The mac-mask argument
is comprised of the high-order part (all the binary bits of which are 1s) and the low-order part (all the
binary bits of which are 0s). By default, the hexadecimal digits of this argument are all Fs.
vlan vlan-id: Specifies a VLAN ID, in the range of 1 to 4094.
priority pri: Specifies the 802.1p priority value corresponding to the specified MAC address. The pri
argument ranges from 0 to 7.
all: Removes all the static MAC address-to-VLAN entries.
Description
Use mac-vlan mac-address to associate the specified VLAN and priority value with the specified MAC
addresses.
Use undo mac-vlan to remove the association.
Two MAC address-to-VLAN entry tables exist in a device. One table contains the MAC address-to-VLAN
entries configured with the mask keyword specified. A MAC address-to-VLAN entry of this type describes
the relationship between a group of MAC addresses and a VLAN, and a priority value. Another table
contains the MAC address-to-VLAN entries configured without the mask keyword specified. A MAC
address-to-VLAN entry of this type describes the relationship between a single MAC address and a
VLAN, and a priority value. The system adds/removes MAC address-to-VLAN entries to/from the two
tables according to the configuration.
Examples
# Associate a single MAC address 0- 1 - 1 with VLAN 100 and 802.1p priority 7.
<Sysname> system-view
[Sysname] mac-vlan mac-address 0-1-1 vlan 100 priority 7
# Associate the MAC addresses with the high-order six hexadecimal digits being 121 122 with VLAN 100
and 802.1p priority 4.
<Sysname> system-view
[Sysname] mac-vlan mac-address 1211-2222-3333 mask ffff-ff00-0000 vlan 100 priority 4

mac-vlan trigger enable

Syntax
mac-vlan trigger enable
153

Advertisement

Table of Contents
loading

This manual is also suitable for:

6125 blade switch series

Table of Contents