Copy Settings Menu - Lexmark CX510 Series User Manual

Understanding the printer menus
Use
Print Recovery
Jam Recovery
On
Off
Auto
Print Recovery
Page Protect
Off
On
Press Sleep Button
Do Nothing
Sleep
Hibernate
Press and Hold Sleep Button
Do Nothing
Sleep
Hibernate
Factory Defaults
Do Not Restore
Restore Now
Export Configuration File
Export

Copy Settings menu

Use
Content Type
Text
Graphics
Text/Photo
Photo
To
Specify whether the printer reprints jammed pages.
Notes:
•
Auto is the factory default setting. The printer reprints
jammed pages unless the memory required to hold the
pages is needed for other printer tasks.
•
On sets the printer to always reprint jammed pages.
• Off sets the printer to never reprint jammed pages.
Successfully print a page that may not have printed otherwise.
Notes:
•
Off is the factory default setting. Off prints a partial page
when there is not enough memory to print the whole page.
•
On sets the printer to print the entire page.
Determine how the printer, while in idle state, reacts to a short
press of the Sleep button.
Note: Sleep is the factory default setting.
Determine how the printer, while in idle state, reacts to a long press
of the Sleep button.
Note: Do Nothing is the factory default setting.
Use the printer factory default settings.
Notes:
• Do Not Restore is the factory default setting.
•
Restore Now returns all printer settings to the factory
default settings except Network/Ports menu settings. All
downloads stored in the RAM are deleted. Downloads stored
in the flash memory or in a hard disk are not affected.
Export configuration files to a flash drive.
To
Specify the content of the original document.
Note: Text/Photo is the factory default setting.
152