1-Port 10-Gigabit Ethernet Spa Leds - Cisco ASR 1000 Series Hardware Installation Manual

Chapter 3 Overview: Cisco ASR 1000 Series Aggregation Services Routers SPAs

1-Port 10-Gigabit Ethernet SPA LEDs

The 1-Port 10-Gigabit Ethernet SPA has two LEDs, an ACTIVE/LINK LED for the port, and a STATUS
LED, as shown in
Figure 3-11
1
Figure 3-12
ACTIVE/LINK LED for the port, and a STATUS LED.
Figure 3-12
1
Table 3-7
Table 3-7
LED Label
ACTIVE/LINK
STATUS
OL-14126-15
Figure 3-11.
1-Port 10-Gigabit Ethernet SPA Faceplate
1
ACTIVE/LINK LED
displays the 1-Port 10-Gigabit Ethernet LAN/WAN-PHY SPA two LEDs, an
1-Port 10-Gigabit Ethernet LAN/WAN-PHY SPA Faceplate
1
ACTIVE/LINK LED
describes the 1-Port 10-Gigabit Ethernet SPA LEDs.
1-Port 10-Gigabit Ethernet SPA and 1-Port 10-Gigabit Ethernet LAN/WAN-PHY SPA
LEDs
Color
Off
Green
Amber
Off
Green
Amber
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide
2
STATUS LED
2
STATUS LED
State Meaning
Off Port is not enabled by software.
On Port is enabled by software and the link is up.
On Port is enabled by software and the link is down.
Off SPA power is off.
On SPA is ready and operational.
On SPA power is on and good, and the SPA is being configured.
1-Port 10-Gigabit Ethernet SPA Overview
SPA-1X10GE-L-V2
2
SPA-1X10GE-WL-V2
2
3-15