Cisco ASR 1000 Series Hardware Installation Manual page 67

Chapter 3 Overview: Cisco ASR 1000 Series Aggregation Services Routers SPAs
Table 3-16
Specification
Wavelength
Cabling distance (maximum)
Operating case temperature
range
Storage temperature range
Supply voltage range
SFP-GE-S Modules
The 1000BASE-SX (short-wavelength) module operates on standard multimode fiber-optic link spans
of up to 1640 feet (500 m) on 50/125um multimode fiber (MMF) and 984 feet (300 m) on 62.5/125um
MMF.
SFP-GE-L Modules
The 1000BASE-LX/LH (long-wavelength/long-haul) module interfaces fully comply with the IEEE
802.3z 1000BASE-LX standard. However, their higher optical quality allows them to reach 6.2 miles
(10 km) over single-mode fiber (SMF) versus the 3.1 miles (5 km) specified in the standard.
OL-14126-15
SFP Module Specifications
Description
SFP-GE-S: 770 to 860 nm
SFP-GE-L: 1270 to 1355 nm
SFP-GE-Z: 1500 to 1580 nm
SFP-GE-T: N/A
GLC-GE-100FX: 1270 to 1380 nm
GLC-ZX-SMD: 1550 nm
SFP-GE-S: 1640 feet (500 m) on 50/125um MMF; 984 feet (300 m)
on 62.5/125um MMF
SFP-GE-L: 6.2 miles (10 km)
SFP-GE-Z: 49.7 miles (80 km)
SFP-GE-T: 328 feet (100 m)
GLC-GE-100FX: 6562 feet (2 km)
GLC-ZX-SMD: 49.7 miles (80 km)
SFP-GE-S: 23 to 185
SFP-GE-L: 23 to 185
SFP-GE-Z: 23 to 185
SFP-GE-T: 23 to 185
GLC-GE-100FX: 23 to 185
GLC-ZX-SMD: 23 to 185
SFP-GE-S: –40 to 185
SFP-GE-L: –40 to 185
SFP-GE-Z: –40 to 185
SFP-GE-T: –40 to 185
GLC-GE-100FX: –40 to 185
GLC-ZX-SMD: –40 to 185
SFP-GE-S: 3.1 to 3.5 V
SFP-GE-L: 3.1 to 3.5 V
SFP-GE-Z: 3.1 to 3.5 V
SFP-GE-T: 3.1 to 3.5 V
GLC-GE-100FX: 3.3 to 3.5 V
GLC-ZX-SMD: 3.1 to 3.5 V
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide
10-Port Gigabit Ethernet SPA Overview
o o
F (–5 to 85 C)
o o
F (–5 to 85 C)
o o
F (–5 to 85 C)
o o
F (–5 to 85 C)
o o
F (–5 to 85 C)
o o
F (–5 to 85 C)
o o
F (–40 to 85 C)
o o
F (–40 to 85 C)
o o
F (–40 to 85 C)
o o
F (–40 to 85 C)
o o
F (–40 to 80 C)
o o
F (–40 to 85 C)
3-27