Cisco Webex Node For Asr 1000 Series Overview; Cisco Webex Node Spa Leds - Cisco ASR 1000 Series Hardware Installation Manual

Cisco WebEx Node for ASR 1000 Series Overview

Cisco WebEx Node for ASR 1000 Series Overview
The Cisco WebEx Node for Cisco ASR 1000 Series SPA (also referred to as the Cisco WebEx Node SPA)
is a double-height SPA that improves the functionality of WebEx meeting services. The traffic between
the enterprise network and the WebEx Data Center is decreased, greatly reducing Internet bandwidth
requirements.
Each Cisco WebEx Node SPA can be configured to perform either web conferencing or voice and video
conferencing but not both features on the same SPA. The Cisco WebEx Node SPA provides a virtual
service engine interface (with a minimum bandwidth of 2.5 GB) to handle the TCP/IP traffic for all
services running on the SPA.

Cisco WebEx Node SPA LEDs

The Cisco WebEx Node SPA has three LEDs and one button, as shown in
The covered port on the faceplate near the STATUS LED is disabled and not intended for customer use.
Note
Figure 3-49 Cisco WebEx Node SPA Faceplate
1
2
3
Because the system shutdown button is recessed, you must use the tip of a pen or similar object to
Note
depress this button and initiate a shutdown of the SPA.
Table 3-44
Table 3-44 Cisco WebEx Node SPA Front Shutdown Button and LEDs
LED Label
Shutdown
Button
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide
3-72
1
System shutdown button
SYS LED
DISK LED
describes the Cisco WebEx Node SPA LEDs and Shutdown button.
Color
Chapter 3 Overview: Cisco ASR 1000 Series Aggregation Services Routers SPAs
4 Unused Ethernet port location
5 STATUS LED
State Meaning
A recessed button that can shut down the system. This is an
alternate method to using the shutdown command.
Figure 3-49.
2 3 4 5
SPA-WMA-K9
OL-14126-15