1-Port Clear Channel Oc-12 Atm Spa Leds - Cisco ASR 1000 Series Hardware Installation Manual

1-Port Clear Channel OC-12 ATM SPA Overview
The following sections describe the 1-Port Clear Channel OC-12 ATM SPA:
•
•
•

1-Port Clear Channel OC-12 ATM SPA LEDs

The 1-Port Clear Channel OC-12 ATM SPA has three types of LEDs. There are two LEDs for the port
on the SPA, and one STATUS LED, as shown in
Figure 3-4
1
2
The 1-Port Clear Channel OC-12 ATM SPA LEDs are described in
Table 3-4
LED Label
C/A
A/L
STATUS
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide
3-10
1-Port Clear Channel OC-12 ATM SPA LEDs, page 3-10
1-Port Clear Channel OC-12 ATM SPA Interface Specifications, page 3-11
1-Port Clear Channel OC-12 ATM SPA Cables and Connectors, page 3-11
1-Port Clear Channel OC-12 ATM SPA Faceplate
C/A (Carrier/Alarm) LED
A/L (Active Loopback) LED
1-Port Clear Channel OC-12 ATM SPA LEDs
Color
Off
Green
Amber
Off
Green
Amber
Off
Amber
Green
Chapter 3 Overview: Cisco ASR 1000 Series Aggregation Services Routers SPAs
Figure
3
State Meaning
Off Port is not enabled by software.
Port is enabled by software, and there is a valid SONET signal
On
without any alarms.
Port is enabled by software, and there is at least one alarm.
On
Off Port is not enabled by software.
Port is enabled by software, and loopback is off.
On
Port is enabled by software, and loopback is on.
On
Off SPA power is off.
On SPA power is on and good, and SPA is being configured.
On SPA is ready and operational.
3-4.
1
SPA-1XOC12-ATM-V2
STATUS LED
Table 3-4.
2 3
OL-14126-15