Cisco ASR 1000 Series Hardware Installation Manual page 10

Release No.
Cisco IOS XE
Release 3.8.1S
Cisco IOS XE
Release 3.7.0S
Cisco IOS XE
Release 3.6.0S
Cisco IOS XE
Release 3.5.0S
Cisco IOS XE
Release 3.4.0S
Cisco IOS XE
Release 3.3.0S
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide
x
Revision Date
OL-14126-14 February 13, 2013
OL-14126-13 July 2012
OL-14126-12 March 29, 2012
OL-14126-11 November 28, 2011
OL-14126-10 July 25, 2011
OL-14126-09 March 30, 2011
Change Summary
Added information pertaining to the
support for the 8-Port Clear-Channel
T3/E3 Serial SPA (SPA-8XT3/E3) on the
Cisco ASR 1000 Series SIP in
4-Port, and 8-Port Clear-Channel T3/E3
Serial SPA Overview" section on page
Added information pertaining to the
following updates:
Introduction of the Cisco ASR
•
1002-X Router
• Introduction of the Cisco
ASR1000-ESP100
Support for Cisco ASR1000-SIP40
•
on all routers that support Cisco
ASR1000-SIP10
Information about these new features has
been added in various sections in this
guide.
Added information about support for the
circuit emulation (CEM) mode on the
2-Port Channelized T3/E3 ATM CEoP
SPA.
Added information about feature
enhancement in the following SPA:
Support for ATM on clear E3 mode for
SPA-2CHT3-CE-ATM
Added information about the following
SPAs:
SPA-2CHT3-CE-ATM
•
(Asynchronous Transfer Mode only)
SPA-24CHT1-CE-ATM (Circuit
•
Emulation mode only)
Added information pertaining to feature
change for CPU-Usage show
Added information about the following
SPAs:
1-Port 10-Gigabit Ethernet
•
LAN/WAN-PHY SPA
• 1-Port Channelized OC-3 STM1
ATM Circuit Emulation over Packet
(CEoP) SPA (Circuit Emulation
Mode only)
"2-Port,
55.
command.
OL-14126-15