Modular Optics Compatibility
The SPAs will only accept the SFP modules listed as supported in this document. An SFP module check
Note
is run every time an SFP module is inserted into a SPA and only SFP modules that pass this check will be
usable.
Table
optics modules that have been qualified for use with a SPA.
For more information about any of the supported transceivers for SPAs in these tables, refer to the Cisco
Transceiver Modules site for that module on Cisco.com at:
http://www.cisco.com/en/US/products/hw/modules/ps5455/prod_installation_guides_list.html
Table 1-7
SPA
1-Port Clear Channel OC-3 ATM
SPA
3-Port Clear Channel OC-3 ATM
SPA
1-Port Clear Channel OC-12 ATM
SPA
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide
1-6
1-7,
Table
1-8,
Table
1-9,
ATM SPA Optics Compatibility
Table
1-10,
Table
1-11,
Table
Qualified Optics Modules (Cisco Part Numbers)
•
SFP-OC3-MM
SFP-OC3-SR
•
SFP-OC3-IR1
•
SFP-OC3-LR1
•
SFP-OC3-LR2
•
SFP-OC3-MM
•
SFP-OC3-SR
•
SFP-OC3-IR1
•
•
SFP-OC3-LR1
•
SFP-OC3-LR2
•
SFP-OC12-MM
SFP-OC12-SR
•
SFP-OC12-IR1
•
SFP-OC12-LR1
•
SFP-OC12-LR2
•
Chapter 1
SIP and SPA Product Overview
1-12, and
Table 1-13
show the types of
OL-14126-15