10-Port Gigabit Ethernet Spa Connectors; Sfp Module Connections; Sfp Module And Cabling Specifications For Gigabit Ethernet Spas; Sfp Module Specifications - Cisco ASR 1000 Series Hardware Installation Manual

Services routers sip and spa
Table of Contents

Advertisement

Chapter 3
Overview: Cisco ASR 1000 Series Aggregation Services Routers SPAs
Table 3-14
LED Label

10-Port Gigabit Ethernet SPA Connectors

The 10-Port Gigabit Ethernet SPA has ten electrical connectors that support SFP modules. Each port can
send and receive traffic using cabling appropriate for the SFP module inserted.

SFP Module Connections

The small form-factor pluggable (SFP) module is an input/output (I/O) device that plugs into the Gigabit
Ethernet optical slots on the 10-Port Gigabit Ethernet SPA, linking the port with a 1000BASE-X
fiber-optic network.
The 10-Port Gigabit Ethernet SPA will only accept the SFP modules listed as supported in this document.
Note
An SFP module check is run every time an SFP is inserted into the 10-Port Gigabit Ethernet SPA and
only SFP modules that pass this check will be usable by the 10-Port Gigabit Ethernet SPA.
SFP modules exist for technologies other than Gigabit Ethernet and for products other than the 10-Port
Gigabit Ethernet SPA. However, the information in this document pertains only to SFP modules that plug
into the 10-Port Gigabit Ethernet SPA ports.
See the
SFP module options, module specifications, and cabling specifications.
For CWDM and DWDM SFP module specifications, see the
Gigabit Ethernet SPAs" section on page

SFP Module and Cabling Specifications for Gigabit Ethernet SPAs

The following sections describe SFP module specifications and cabling information for the Gigabit
Ethernet SPAs:

SFP Module Specifications

The SFP module has a receiver port (RX) and a transmitter port (TX) that compose one optical interface.
Table
specifications.
OL-14126-15
10-Port Gigabit Ethernet SPA LEDs (continued)
Color
Green
Amber
"SFP Module and Cabling Specifications for Gigabit Ethernet SPAs" section on page 3-25
SFP Module Specifications, page 3-25
SFP Module Cabling and Connection Equipment, page 3-28
3-15,
Table
3-16,
Table
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide
State
Meaning
On
SPA is ready and operational.
On
SPA power is on and good, and the SPA is being
configured.
3-29.
3-17,
Table
3-18, and
Table 3-19
10-Port Gigabit Ethernet SPA Overview
"CWDM and DWDM SFP Modules for
provide SFP module information and
for
3-25

Advertisement

Table of Contents
loading

Table of Contents