Port 10-Gigabit Ethernet Spa Overview; 1-Port 10-Gigabit Ethernet Spa Leds - Cisco XR 12000 Series Hardware Installation Manual

Chapter 2 Overview: Cisco XR 12000 Series Router Shared Port Adapters
Figure 2-8
Router
3 TxD+
6 TxD–
1 RxD+
2 RxD–

1 Port 10-Gigabit Ethernet SPA Overview

The following sections describe the 1-Port 10-Gigabit Ethernet SPA:
•
•

1-Port 10-Gigabit Ethernet SPA LEDs

The 1-Port 10-Gigabit Ethernet SPA has two LEDs, an ACTIVE/LINK LED for the port and a STATUS
LED, as shown in
Figure 2-9
1
Table 2-11
Table 2-11
LED Label
ACTIVE/LINK
STATUS
OL-17438-04
Crossover Cable Pinout, RJ-45 Connections Between Routers
Router
3 TxD+
6 TxD–
1 RxD+
2 RxD–
1-Port 10-Gigabit Ethernet SPA LEDs, page 2-13
1-Port 10-Gigabit Ethernet SPA XFP Optical Transceiver Modules, Connectors, and Cables,
page 2-14
Figure 2-9.
1-Port 10-Gigabit Ethernet SPA Faceplate
1
ACTIVE/LINK LED
describes the 1-Port 10-Gigabit Ethernet SPA LEDs.
1-Port 10-Gigabit Ethernet SPA LEDs
Color
Off
Green
Amber
Off
2 STATUS LED
State Meaning
Off Port is not enabled by software.
On Port is enabled by software and the link is up.
On Port is enabled by software and the link is down.
Off SPA power is off.
Cisco XR 12000 Series Router SIP and SPA Hardware Installation Guide

1 Port 10-Gigabit Ethernet SPA Overview

SPA-1X10GE-L-V2
2
2-13