Preparing To Install A Sip Or A Spa; Required Tools And Equipment; Safety Guidelines; Safety Warnings - Cisco ASR 1000 Series Hardware Installation Manual

Preparing to Install a SIP or a SPA

This chapter describes the general equipment, safety, and site preparation requirements for installing
SIPs and SPAs. This chapter contains the following sections:
•
•
•

Required Tools and Equipment

You need the following tools and parts to install SIPs and SPAs. If you need additional equipment,
contact a service representative for ordering information.
•
•
•
•
•
•
•
•

Safety Guidelines

This section provides safety guidelines that you should follow when working with any equipment that
connects to electrical power or telephone wiring.

Safety Warnings

Safety warnings appear throughout this publication in procedures that, if performed incorrectly, might
harm you. A warning symbol precedes each warning statement.
OL-14126-15
Required Tools and Equipment, page 4-1
Safety Guidelines, page 4-1
Laser/LED Safety, page 4-9
Shared port adapter interface processor (SIP)
Shared port adapter (SPA)
Number 1 Phillips screwdriver
Number 2 Phillips screwdriver
3/16-inch flat-blade screwdriver
Your own electrostatic discharge (ESD)-prevention equipment or the disposable grounding wrist
strap supplied with the SIP or SPA
Antistatic mat
Antistatic container
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide
C H A P T E R
4
4-1