24-Port Channelized T1/E1/J1 Ceop Spa Interface Specifications; 24-Port Channelized T1/E1/J1 Ceop Spa Cables And Connectors - Cisco ASR 1000 Series Hardware Installation Manual

Chapter 3 Overview: Cisco ASR 1000 Series Aggregation Services Routers SPAs
Table 3-49
Table 3-52
LED Label
STATUS
A/C

24-Port Channelized T1/E1/J1 CEoP SPA Interface Specifications

The physical layer interface for the 24-Port Channelized T1/E1/J1 CEoP SPA is a customer-installed
high-density connector. This connector has thumbscrews that should be screwed into the SPA when the
cable is installed.

24-Port Channelized T1/E1/J1 CEoP SPA Cables and Connectors

The 24-Port Channelized T1/E1/J1 CEoP SPA requires a Cisco cable (part number CABLE-24T1E1J1),
which is shown in
Figure 3-54
1
50
OL-14126-15
describes the 24-Port Channelized T1/E1/J1 CEoP SPA LEDs.
24-Port Channelized T1/E1/J1 CEoP SPA LEDs
Color State
Off Off
Amber On
Green On
Off Off
Green On
Amber On
Figure 3-54.
24-Port Channelized T1/E1/J1 CEoP SPA High-Density Cable
51
100
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide
24-Port Channelized T1/E1/J1 ATM CEoP SPA Overview
Meaning
SPA power is off.
SPA power is on and good, and SPA is being configured.
SPA is ready and operational.
Port is not enabled by software.
Port is enabled by software.
Port is enabled by software, and there is at least one alarm.
50
25
26
1
3-81