24-Port Channelized T1/E1/J1 Atm Ceop Spa Overview; 24-Port Channelized T1/E1/J1 Ceop Spa Leds - Cisco ASR 1000 Series Hardware Installation Manual

24-Port Channelized T1/E1/J1 ATM CEoP SPA Overview

Table 3-51
connectors shown in
Table 3-51
Connector Label
TX
RX
24-Port Channelized T1/E1/J1 ATM CEoP SPA Overview
The following sections describe the 24-Port Channelized T1/E1/J1 CEoP SPA:
•
•
•
•

24-Port Channelized T1/E1/J1 CEoP SPA LEDs

The 24-Port Channelized T1/E1/J1 CEoP SPA has two types of LEDs, as shown in the following figure:
Figure 3-53
1
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide
3-80
describes the signal descriptions for the 2-Port Channelized T3/E3 ATM CEoP SPA
Figure 3-52.
2-Port Channelized T3/E3 ATM CEoP SPA Connectors
Meaning
Transmitted signals appear on the center contact. The outer shield is ground for
the 75-ohm coaxial cable you attach to the TX DIN 1.0/2.3 connector.
Received signals appear on the center contact. The outer shield is ground for the
75-ohm coaxial cable you attach to the RX DIN 1.0/2.3 connector.
24-Port Channelized T1/E1/J1 CEoP SPA LEDs
24-Port Channelized T1/E1/J1 CEoP SPA Interface Specifications
24-Port Channelized T1/E1/J1 CEoP SPA Cables and Connectors
24-Port Channelized T1/E1/J1 CEoP SPA Patch Panel
24-Port Channelized T1/E1/J1 CEoP SPA Faceplate
B1
A/C (Alarm/Carrier) LEDs
Chapter 3 Overview: Cisco ASR 1000 Series Aggregation Services Routers SPAs
TX / RX
2 STATUS LED
A
0 1 2 3 4 5 6 7 8 9 10 11
C
A
12 13 14 15 16 17 18 19 20 21 22 23
C
1
2
OL-14126-15