Xfp Port Cabling Specifications; 2-Port Gigabit Ethernet Spa Overview; 2-Port Copper And Optical Gigabit Ethernet Spa Leds - Cisco ASR 1000 Series Hardware Installation Manual

2-Port Gigabit Ethernet SPA Overview

XFP Port Cabling Specifications

Table 3-9
Table 3-9
XFP Module
XFP-10GLR-OC192SR
XFP-10GER-OC192IR
XFP-10GZR-OC192LR
2-Port Gigabit Ethernet SPA Overview
The following sections describe the 2-Port Copper and Optical Gigabit Ethernet SPA:
•
•

2-Port Copper and Optical Gigabit Ethernet SPA LEDs

The 2-Port Copper and Optical Gigabit Ethernet SPA has two types of LEDs: an A/L LED for each port
on the SPA, and one STATUS LED, as shown in
Figure 3-15
1
Table 3-10
Table 3-10
LED Label
A/L
STATUS
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide
3-18
shows the port cabling specifications for an XFP module.
XFP Port Cabling Specifications
Wavelength
1310 nm
1550 nm
1550 nm
2-Port Copper and Optical Gigabit Ethernet SPA LEDs, page 3-18
2-Port Copper and Optical Gigabit Ethernet SPA Cables, Connectors, and Pinouts, page 3-19
2-Port Copper and Optical Gigabit Ethernet SPA Faceplate
A/L (Active/Link) LED
describes the 2-Port Copper and Optical Gigabit Ethernet SPA LEDs.
2-Port Copper and Optical Gigabit Ethernet SPA LEDs
Color
Off
Green
Amber
Off
Chapter 3 Overview: Cisco ASR 1000 Series Aggregation Services Routers SPAs
Fiber Type
SMF
SMF
SMF
Figure 3-15.
1
2
STATUS LED
State Meaning
Off Port is not enabled.
On Port is enabled and the link is up.
On Port is enabled and the link is down.
Off SPA power is off.
SPA-2X1GE-V2
2
OL-14126-15