Port 10-Gigabit Ethernet Spa Overview - Cisco ASR-1000-SIP10 Hardware Installation Manual

1-Port 10-Gigabit Ethernet SPA Overview

The 4-Port and 8-Port Fast Ethernet SPA supports automatic MDI/MDIX crossover at all speeds of
operation allowing the SPA to work with straight-through and crossover Ethernet cables. Depending on
your RJ-45 interface cabling requirements, use the pinouts in
Figure 3-12
Hub or LAN switch
Figure 3-13
Router
3 TxD+
6 TxD–
1 RxD+
2 RxD–
1-Port 10-Gigabit Ethernet SPA Overview
The following sections describe the 1-Port 10-Gigabit Ethernet SPA:
•
•
1-Port 10-Gigabit Ethernet SPA LEDs
The 1-Port 10-Gigabit Ethernet SPA has two LEDs, an ACTIVE/LINK LED for the port and a STATUS
LED, as shown in
Figure 3-14
1
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide
3-16
Chapter 3
Straight-Through Cable Pinout, RJ-45 Connection to a Hub or Repeater
Ethernet port
3 TxD+ 3 RxD+
6 TxD– 6 RxD–
1 RxD+ 1 TxD+
2 RxD– 2 TxD–
Crossover Cable Pinout, RJ-45 Connections Between Routers
Router
3 TxD+
6 TxD–
1 RxD+
2 RxD–
1-Port 10-Gigabit Ethernet SPA LEDs, page 3-16
1-Port 10-Gigabit Ethernet SPA XFP Optical Transceiver Modules, Connectors, and Cables,
page 3-17
Figure 3-14.
1-Port 10-Gigabit Ethernet SPA Faceplate
1
ACTIVE/LINK LED
Overview: Cisco ASR 1000 Series Aggregation Services Routers Shared Port Adapters
STATUS LED
2
Figure 3-12 and Figure 3-13.
SPA-1X10GE-L-V2
2
OL-14126-03