Cisco ASR 1000 Series Hardware Installation Manual page 12

Release No.
Cisco IOS XE
Release 2.5
Cisco IOS XE
Release 2.4
Cisco IOS XE
Release 2.3
Cisco IOS XE
Release 2.2
Cisco IOS XE
Release 2.1
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide
xii
Revision Date
OL-14126-05 November 25, 2009
OL-14126-04 June 30, 2009
OL-14126-03 November 24, 2008
OL-14126-02 September 10, 2008
OL-14126-01 April 25, 2008
Change Summary
Information added for the following
hardware in Cisco IOS XE Release 2.5:
• 1-Port Clear Channel OC-12 ATM
SPA
Cisco 10GBASE-SR XFP transceiver
•
module for MMF, 850-nm
wavelength, dual LC connector
(XFP-10G-MM-SR)
Cisco 1000BASE-BX10 SFP module
•
for single-strand SMF, 1490-nm
TX/1310-nm RX wavelength
(GLC-BX-D)
Cisco 1000BASE-BX10 SFP module
•
for single-strand SMF, 1310-nm
TX/1490-nm RX wavelength
(GLC-BX-U)
Information added for the following
•
SPAs:
2-Port, 4-Port, and 8-Port OC-12
–
POS SPA
1-Port OC-48 POS SPA
–
8-Port OC-3 POS SPA
–
1-Port OC-192 POS SPA
–
Cisco WebEx Node for ASR
–
1000 Series SPA
New information on the use of SPA
•
cable clips to help with removal of
SPAs from a SIP on the Cisco ASR
1000 Series Routers was added.
Information added for the following
SPAs:
• 1-Port and 3-Port OC-3 ATM SPA
Information added for the following
SPAs:
2-Port and 4-Port OC-48c/STM-16
•
POS SPA
1-Port Channelized STM-1/OC-3
•
SPA
First release.
OL-14126-15