4-Port And 8-Port Fast Ethernet Spa Cables, Connectors, And Pinouts - Cisco ASR 1000 Series Hardware Installation Manual

Services routers sip and spa
Table of Contents

Advertisement

Chapter 3
Overview: Cisco ASR 1000 Series Aggregation Services Routers SPAs
Table 3-5
Table 3-5
LED Label
Port Number
A/L (0, 1, 2, 3, 4, 5, 6 or 7)
STATUS
1. In this case, port number refers to the numbered LEDs on the 8-Port Fast Ethernet SPA (0, 1, 2, 3, 4, 5, 6, or 7). Each LED

4-Port and 8-Port Fast Ethernet SPA Cables, Connectors, and Pinouts

The interface connectors on the 4-Port and 8-Port Fast Ethernet SPA are four or eight individual RJ-45
receptacles. You can use all interface connectors simultaneously. Each connection supports IEEE 802.3
and Ethernet 10/100BASE-T interfaces compliant with appropriate standards. Cisco does not supply
Category 5 unshielded twisted pair (UTP) RJ-45 cables; these cables are available commercially.
Figure 3-8
Figure 3-8
RJ-45 connector
Table 3-6
Pin
1
2
3
6
Referring to the RJ-45 pinout in
Note
the unused Category 5 UTP cable pairs 4/5 and 7/8. Common-mode termination reduces the
contributions to electromagnetic interference (EMI) and susceptibility to common-mode sources. Wire
pairs 4/5 and 7/8 are actively terminated in the RJ-45 port circuitry in the 4-Port and 8-Port Fast Ethernet
SPA.
OL-14126-15
describes the 4-Port and 8-Port Fast Ethernet SPA LEDs.
4-Port and 8-Port Fast Ethernet SPA LEDs
1
number on the 8-Port Fast Ethernet SPA references a port on the SPA.
shows the RJ-45 connector.
RJ-45 Connector Pinouts, Plug, and Receptacle
8 7 6 5 4 3 2 1
RJ-45 Connector Pinouts
Description
Transmit data + (TxD+)
TxD–
Receive data + (RxD+)
RxD–
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide
Color
State
Off
Off
Green
On
Amber
On
Off
Off
Green
On
Amber
On
Table 3-6
lists the pinouts and signals for the RJ-45 connector.
Table
3-6, proper common-mode line terminations should be used for
4-Port and 8-Port Fast Ethernet SPA Overview
Meaning
Port is not enabled.
Port is enabled and the link is up.
Port is enabled and the link is down.
SPA power is off.
SPA is ready and operational.
SPA power is on and good, and the SPA is
being configured.
3-13

Advertisement

Table of Contents
loading

Table of Contents