2-Port Channelized T3/E3 Atm Ceop Spa Overview; 2-Port Channelized T3/E3 Atm Ceop Spa Leds - Cisco ASR 1000 Series Hardware Installation Manual

2-Port Channelized T3/E3 ATM CEoP SPA Overview

2-Port Channelized T3/E3 ATM CEoP SPA Overview
The following sections describe the 2-Port Channelized T3/E3 ATM CEoP SPA:
•
•
•

2-Port Channelized T3/E3 ATM CEoP SPA LEDs

The 2-Port Channelized T3/E3 ATM CEoP SPA has three types of LEDs (see
two LEDs for each port on the SPA, and a single STATUS LED for the SPA.
Figure 3-52
1
2
3
The 2-Port Channelized T3/E3 ATM CEoP SPA LEDs are described in
Table 3-50
LED Label
C/A
A/L
STATUS
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide
3-78
2-Port Channelized T3/E3 ATM CEoP SPA LEDs
2-Port Channelized T3/E3 ATM CEoP SPA Interface Specifications
2-Port Channelized T3/E3 ATM CEoP SPA Cables and Connectors
2-Port Channelized T3/E3 ATM CEoP SPA Faceplate
3
1 2
TX (Transmit) connector
RX (Receive) connector
C/A (Carrier/Alarm) LED
2-Port Channelized T3/E3 ATM CEoP SPA LEDs
Color
Off
Green
Amber
Off
Green
Amber
Off
Amber
Green
Chapter 3 Overview: Cisco ASR 1000 Series Aggregation Services Routers SPAs
4
4 A/L (Active/Loopback)
5 STATUS LED
State Meaning
Off Port is not enabled by software.
On Port is enabled by software.
On Port is enabled by software and there is at least one alarm.
Off Port is not enabled by software.
On Port is enabled by software, loopback is off.
On Port is enabled by software, loopback is on.
Off SPA power is off.
On SPA power is on and the SPA is being configured.
On SPA is ready and operational.
Figure 3-52). There are
SPA-2CHT3-CE-ATM
5
Table 3-50.
OL-14126-15