Weekly Timer; Settings For The Weekly Timer; Accessing The Weekly Timer Settings - Olivetti d-Copia 45 Operation Manual

Section 7 COPIER MANAGEMENT FUNCTIONS

2. Weekly timer

Power to the copier can be turned ON and OFF automatically at specified times on each day of the week between Monday and Sunday.
Set the copier to be turned ON early so that it is warmed up and ready for the start of work in the morning, and set it to be turned OFF automatically
in the evening in case nobody remembers to switch it off manually.
NOTES
• When the weekly timer is turned ON, do NOT remove the power plug from its power source and be sure to leave the main switch ON ( | ) as well.
• In order to have the weekly timer operate properly, make absolutely certain that the settings for the date and time are correct.

(1) Settings for the weekly timer

Setting
Programming the Perform this procedure when you want to register the times at which the copier is to be
weekly timer turned ON and OFF during each day of the week. If you leave the main switch ON ( | ),
the copier will be turned ON and OFF automatically at the times scheduled for each
individual day. You can also set the timer to leave the copier ON or OFF all day for any
day of the week.
Canceling the timer Perform this procedure when the copier is to be out of use for any full day (holiday, etc.)
function temporarily outside of the normal weekly schedule. In this case, it is necessary to cancel the timer
function in advance for the day in question. The copier will then remain OFF for that
whole day but, on the same day of the following week, the timer will resume turning the
copier ON and OFF at the times originally registered.
Turning the weekly Perform this procedure when the weekly timer function is not required and you want to
timer ON/OFF turn it OFF.

(2) Accessing the weekly timer settings

Perform the following procedure when you want to access the
screens for each of the weekly timer settings.
1 With the content of the "Basic" tab displayed, press the [ ]
key. The "Default setting" screen will be displayed.
7-14
Description
2 Touch the "Weekly timer" ["Week timer"] key on the right side
of the touch panel.
Inch specifications
Default setting
Default setting
Copy
default
Machine Document
default Management
Metric specifications
Default setting
Default setting
Copy
default
Machine Document
default Management
Reference page
7-15
7-16
7-17
End
Weekly
Language Management
timer
Bypass BOX
setting Management
Print
Form
End
Week
Language Management
timer
Bypass
Hard Disk
setting
Management
Print
Form