Table of Contents
Advertisement
Cover drawer[cassette]
Perform the following procedure to set which drawer[cassette] will be
used to feed the cover sheets in the cover mode, the booklet/stitching
mode and the book to booklet mode.
1
Display the "Copy default" screen.
(See "(5) Accessing the copy default settings" on page 7-36.)
Inch specifications
Default setting
Default setting
Copy
Language
default
Bypass
setting
Machine
Document
default
Management
Metric specifications
Default setting
Default setting
Copy
Language
default
Bypass
setting
Machine
Document
default
Management
2
Select "Drawer for cover paper" ["Cover for cover paper"] in
the settings list on the left side of the touch panel and then
touch the "Change #" key.
The "Drawer for cover paper" ["Cover for cover paper"] screen
will be displayed.
Inch specifications
Default setting
Copy default
Default menu
Default cassette
1st paper
Drawer for cover paper
Bypass
Default magnification
Manual
Auto exposure adj.(Auto)
Standard
Auto exposure adj.(OCR)
Standard
Default setting
Metric specifications
Default setting
Copy default
Default menu
Default cassette
1st paper
Cassette for cover paper
Bypass
Default mode
Manual
Auto exposure adj.(Auto)
Standard
Auto exposure adj.(OCR)
Standard
Default setting
End
Weekly
Management
timer
BOX
Management
Print
Form
End
Week
Management
timer
Hard Disk
Management
Print
Form
Close
Setting mode
Up
Down
Change #
Close
Setting mode
Up
Down
Change #
Section 7 COPIER MANAGEMENT FUNCTIONS
3
Touch the key that corresponds to the desired
drawer[cassette].
Inch specifications
Drawer for cover paper
S e l e c t d rawe r fo r c ove r p a p e r.
1st paper
2nd paper
3rd paper
Bypass
4th paper
5th paper
D e fa u l t s e t t i n g - C o py d e fa u l t
Metric specifications
Cassette for cover paper
Select cassette for cover paper.
1st paper
2nd paper
3rd paper
Bypass
4th paper
5th paper
Default setting - Copy default
NOTES
• If you want to quit the displayed setting without changing it, touch
the "Back" key. The touch panel will return to the screen in step 2.
• The "5th paper" key will only be displayed when the optional Side
Feeder, which is only available for 55 cpm copiers, is installed on
your copier.
4
Touch the "Close" key. The touch panel will return to the
screen in step 2.
5
Touch the "Close" key once again. The touch panel will return
to the "Default setting" screen.
6
Touch the "End" key. The touch panel will return to the
contents of the "Basic" tab.
Back
Close
Back
Close
7-45
Advertisement
Table of Contents
