Olivetti d-Copia 45 Operation Manual page 168

Section 7 COPIER MANAGEMENT FUNCTIONS
3
Use the keypad to enter a new 4-digit management code.
Inch specifications
Management code change
Able to change management code.(# key)
Default setting - Machine default
Metric specifications
Change MGMT code with #
Able to change management code.(# key)
Default setting - Machine default
NOTE
If you want to quit the displayed setting without changing it, touch the
"Back" key. The touch panel will return to the screen in step 2.
4 Touch the "Close" key. The touch panel will return to the
screen in step 2.
5 Touch the "Close" key once again. The touch panel will return
to the "Default setting" screen.
6 Touch the "End" key. The touch panel will return to the
contents of the "Basic" tab.
Auto shut-off ON/OFF
Perform the following procedure to set whether or not to have the
auto shut-off function automatically turn the main switch OFF a certain
amount of time after copying, or if no operation has been performed
on the copier during that time.
1 Display the "Machine default" screen.
(See "(2) Accessing the machine default settings" on
page 7-21.)
Inch specifications
Default setting
Default setting
Copy
Language
default
Bypass
setting
Machine Document
default Management
Metric specifications
Default setting
Default setting
Copy
Language
default
Machine Document
default Management
7-32
Back Close
Back Close
End
Weekly
Management
timer
BOX
Management
Print
Form
End
Week
Management
timer
Bypass
Hard Disk
setting Management
Print
Form
2
Select "Auto shut-off" in the settings list on the left side of the
touch panel and then touch the "Change #" key.
The "Auto shut-off" screen will be displayed.
Inch specifications
Default setting
Machine default
Default menu
Silent mode Off
Date/Time 2001/10/30 14:02
Time difference GMT+08:00
Management code change 4500
Auto shut-off On
Default setting
Metric specifications
Default setting
Machine default
Default menu Setting mode
Silent mode Off
Date/Time 30/10/'01 14:02
Time difference GMT+08:00
Change MGMT code with # 4500
Auto shut-off On
Default setting
3 Touch the "On" key if you want to use the auto shut-off
function.
Inch specifications
Auto shut-off
S e l e c t a u t o s h u t - o f f m o d e a f t e r l a s t s e t t i n g
o r w h e n c o py i n g i s d o n e.
On
Off
D e fa u l t s e t t i n g - C o py d e fa u l t
Metric specifications
Auto shut-off
S e l e c t a u t o s h u t - o f f m o d e a f t e r l a s t s e t t i n g
o r w h e n c o py i n g i s d o n e.
On
Off
Default setting - Machine default
NOTE
• If auto shut-off interferes with your copying operations, turn this
function OFF. However, it is recommended that you try to set a
longer time interval until auto shut-off engages before you actually
turn it OFF.
• If you want to quit the displayed setting without changing it, touch
the "Back" key. The touch panel will return to the screen in step 2.
4 Touch the "Close" key. The touch panel will return to the
screen in step 2.
5 Touch the "Close" key once again. The touch panel will return
to the "Default setting" screen.
6 Touch the "End" key. The touch panel will return to the
contents of the "Basic" tab.
Close
Setting mode
Up
Down
Change #
Close
Up
Down
Change #
Back Close
Back Close